AFI · Alu Fasad Inovasi

Insight / Secondary skin

A secondary skin is a second layer in front of the outer wall.

A secondary skin is a second layer in front of a building's outer wall, made of fins, louvres, or perforated panels. It cuts solar heat and shapes the building's elevation, but it does not keep water out: rain and wind are still held back by the wall behind it.

01

How does a secondary skin differ from a curtain wall?

A curtain wall is the outer wall itself. A secondary skin stands in front of an outer wall that already exists.

Curtain wall

The outer wall itself, so its joints have to be watertight.

Secondary skin

Air and water pass through it, so it does not need to be watertight. The wall behind it holds back the rain and wind.

Secondary skin framing

Still calculated against wind load, because its surface is large and it is tied back to the building's structure.

02

What types of secondary skin are used most often?

Fins, louvres, and perforated panels all stand in front of the outer wall. Each works on something different: sun, air, or light.

Vertical or horizontal fins are aluminium profiles that project from the glass face. Horizontal fins generally stop the high sun, while vertical fins stop the morning and afternoon sun that comes in from the side. We worked on vertical and horizontal fins on three office towers in IKN, and on ±2,560 m² of vertical fins at Sekolah Buddha Tzu Chi PIK 2.

A louvre is a row of blades that lets air through. It is used for plant rooms, parking, or any surface that needs ventilation without looking open. At Sekolah Buddha Tzu Chi PIK 2, our work includes ±620 m² of louvres.

Perforated panels, in ACP or perforated aluminium, filter light and disguise what is behind them, for example an old facade in a refurbishment. At Solo Grand Mall we worked on ±450 m² of perforated ACP.

See the facade projects we have worked on

What sets the cost, and when is it not needed?

The elements you see from outside are only part of the cost.

Secondary skin section schematic: fins in front of a glass outer wallRAIN & AIR PASS THROUGHFINGAPGLASS OUTER WALLKEEPS WATER OUTFLOOR SLAB EDGEBRACKET TO STRUCTURE

The cost of a secondary skin is set by the spacing and depth of the elements, the brackets back to the structure, the choice between extruded profile and folded ACP, and access for cleaning the glass behind it. The brackets back to the structure often cost more than the elements.

A secondary skin is not always needed. When glass with solar control is enough for that side, a secondary skin is not needed. That glass is covered in the FAQ on our curtain wall page.

03

Questions about facade secondary skins

A secondary skin cuts solar heat and shapes the building's elevation. Rain and wind are held back by the wall behind it.

Is a secondary skin the same as a double skin facade?
No. A double skin is two layers of glass with a designed air cavity. A secondary skin is generally open.
Does a secondary skin have to be watertight?
No. Air and water pass through a secondary skin, so its joints do not need to be watertight. Rain and wind are still held back by the wall behind it.
Does secondary skin framing need to be calculated against wind load?
Yes. Even though it is not watertight, its framing is still calculated against wind load, because its surface is large and it is tied back to the building's structure.
What sets the cost of a secondary skin?
The spacing and depth of the elements, the brackets back to the structure, which often cost more than the elements, the choice between extruded profile and folded ACP, and access for cleaning the glass behind it.
When is a secondary skin not needed?
When glass with solar control is enough for that side.

Weighing a secondary skin for a building?